How To Code Video In Motion On A G Series BMW | G20 Coding DIY!

Опубликовано: 26 Январь 2020
на канале: Vehicular DIY

23,940

321

In this video I show you how to code video in motion on a G20 BMW with iDrive 7.0. This would apply to any 2019 and newer BMW with iDrive 7.0 including the G05 BMW X5 and the G07 X7 etc.

By default if you're watching any video content on your BMW it will deactivate once the car is in motion. This video shows you have to code that out. Please follow your local regulations and do not use this on public roads. This is for testing purposes only.

I used E-Sys 3.33.4 and E-Sysx launcher to accomplish this. Here is a thread showing you how to set it up:

https://www.bimmerfest.com/forums/sho...

You can get E-Sys X here (not affiliated):

http://esysx.com/

You can purchase the cable ICOM or ENET Cable here (affiliate):

https://amzn.to/2Ke9Xb3

If this is the first video you're catching of mine consider subscribing, I upload regularly.

Thanks for watching :) When you see the word "affiliate" listed beside any link in my description please know that this is a custom link and I will earn a small commission if you opt to purchase using said link. This is at no extra cost to you so it's a win all around :) Thank you!