How to Replace Outer Tie Rods 2003-2007 Honda Accord
Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/184/hj/tie-rods-and-...
This video shows you how to install new outer tie rods on your 2003-2007 Honda Accord. Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections.
Estimated installation time for a professional technician is approximately: 1 hour 42 minutes
This repair was done on a 2006 Honda Accord EX 3.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
🔧 List of tools used:
• 19mm Wrench http://1aau.to/oan3/1AXAA00010
• 24mm Wrench
• 17mm Socket http://1aau.to/ocrU/1AXAA00015
• 19mm Socket
• Pliers
• Torque Wrench http://1aau.to/obs4/1AXAA00044
• Copper Anti-Seize
• Gloves http://1aau.to/obBH/1AXSS00048
• Safety Glasses
• Floor Jack http://1aau.to/oaLu/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/oaxV/1AXAA00065
• Wheel Chocks
Subscribe: / @1aauto
For More Info visit us at http://1aau.to/h/gzv/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
